Difference between revisions of "Talk:Aquaponics"
(Created page with "List of automation needed for a container held aquaponics system: All readings, data logging, and switching ON/OFF must be available for review/control via a webpage browser ...") |
|||
Line 1: | Line 1: | ||
List of automation needed for a container held aquaponics system: | List of automation needed for a container held aquaponics system: | ||
− | All readings, data logging, and switching ON/OFF must be available for review/control via a webpage browser | + | All readings, data logging, and switching ON/OFF must be available for review/control via a webpage browser, with logging. |
Some ideas how it looks like are visible here: | Some ideas how it looks like are visible here: | ||
Line 10: | Line 10: | ||
+ | For each Aquaponics System: | ||
− | 1. pH meter | + | 1. pH meter in the water |
+ | |||
+ | 2. DO /Dissolved oxygen/ meter (in the fish tank) | ||
+ | |||
+ | 3. Temperature - of the air and of the water | ||
+ | |||
+ | 4. Time for each cycle in each Grow Bed | ||
+ | |||
+ | 5. Is the water pump running - reading to the voltage and amperage of the pump | ||
+ | |||
+ | 6. Speed of the water /if the water is moving, then pump is running and nothing is clogged/ | ||
+ | |||
+ | 7. Speed in the air /the air fans are running, and everything above said for the water pump - voltage and amperage readings for air fans/ | ||
+ | |||
+ | 8. Luminosity in the container - are all the lamp emitting light, or some of them are burned out... | ||
+ | |||
+ | 9. Relative humidity in the air. |
Revision as of 18:47, 3 December 2013
List of automation needed for a container held aquaponics system:
All readings, data logging, and switching ON/OFF must be available for review/control via a webpage browser, with logging.
Some ideas how it looks like are visible here:
1) This senior citizen runs aquaponics with automation... http://youtu.be/X2wWTadsBDA
2) And younger man, self-made automation: https://www.youtube.com/watch?v=nx-qK7BdZjc
For each Aquaponics System:
1. pH meter in the water
2. DO /Dissolved oxygen/ meter (in the fish tank)
3. Temperature - of the air and of the water
4. Time for each cycle in each Grow Bed
5. Is the water pump running - reading to the voltage and amperage of the pump
6. Speed of the water /if the water is moving, then pump is running and nothing is clogged/
7. Speed in the air /the air fans are running, and everything above said for the water pump - voltage and amperage readings for air fans/
8. Luminosity in the container - are all the lamp emitting light, or some of them are burned out...
9. Relative humidity in the air.