Difference between revisions of "Surface Suit"

From OpenLuna
Jump to: navigation, search
Line 8: Line 8:
  
 
Boots are expected to be near off the shelf Canadian Pack Boots.
 
Boots are expected to be near off the shelf Canadian Pack Boots.
 
== Other Suit Considerations ==
 
By: [[User:thehawk|Robert Hawk]]
 
 
Some issues that seem small to us on Earth can become a big deal in space.  An example of which would be scratching your nose.  This may seem quite insignificant, until you have a large glass (or similar substance) plate between you and your finger.  The solution that NASA uses right now for this problem is: "Deal with it, you'll only be in the suit for a couple of hours."  However, if we intend to pack a person into a suit for several days, as is the current plan for our spacecraft, this could become a show-stopper, depending on how bad the itch is.  This can easily be solved by placing the "loop" side of a hook and loop (i.e. Velcro) fastener inside the helmet, on which one can easily scratch any part of the head.  The loop end would be used instead of the hook end because, while still being "scratchy," it is softer so it won't cause damage to the skin while providing relief.  This would only be necessary if the crew member is not planning on taking the suit off for a long period of time.
 
 
[[Image:Surface_suit-Pressure_liner.jpg|thumb|400px| Suit MCP pressure liner]]
 
[[Image:Complete suit.jpg|thumb|400px| complete suit]]
 
 
 
 
 
  
 
== Artists Notes ==
 
== Artists Notes ==

Revision as of 00:42, 23 July 2010

The first part of constructing the surface suit will be development through analogue testing in relevant environments.

We are making our decisions based on certain design concerns

We are working under the thought that the suit needs to be as light as possible, but be completely self-sufficient. Consumables will need to be swappable while wearing the suit. (Remember, the first four will spend two weeks in it, and the follow on missions may need to spend 3-4 days in them.) We do not intend to significantly change the suits unless a dramatic change is made to the state of the art.

This suit is expected be of a MCP/HUT hybrid; although a HUT/soft suit in the style of the University of North Dakota NDX-2 is also being considered. The wearer will wear a coverall over the suit body for armour, heating, or dust mitigation. in future versions, these coveralls will be interchangeable. The helmet will be fixed to the HUT, with several flat planes for view plates. The rational behind flat plates is in ease of spares storage, ease of repair, and ease of polishing/maintenance. The PLSS, HUT, and helmet will also be integrated. The HUT will be entered from the front. Since the view plate is not hemispherical, the view plates will contain electronically polarizing elements for sun mitigation. There will be two water delivery nipples as described elsewhere, as well as two food delivery nipples, one for a savory food, one for a sweet food. Local communications will be handled via a routable VoIP protocol over WiFi, via a computer as described above. This entire system will be redundant. Long distance communication over amateur radio. The suit will be constructed from firm elastic cloth and laced to tension using a speed lace. The helmet will also have redundant lights and cameras.

Boots are expected to be near off the shelf Canadian Pack Boots.

Artists Notes

The suit described above will be skin tight with laced seams on the sides. there will be small metal or plastic clips on the lace points. The color should be pleasing. the laces will be stainless or spectra. The HUT will basically cover the ribcage, like a short vest. The helmet is attached to the top, the PLSS and helmet are integral. The PLSS will extend down halfway to the waist and will be about 2 cm thick, as wide as the back, and up to the top of the shoulders. There will be a heavy solid connection between the back of the helmet and the PLSS. Note the faceplate panes from above. The armour coveralls will be looser, but not very over the suit, and will have several straps and clips to keep the knee, elbow, shin, forearm and thigh pads in place. The colour will be a combination of lime Hi-Vis green and some other artistic, attractive design.

Think a combination of "Red Planet" surface suits for the body, Cary-Ann Moss's helmet (but flat planes, not curved.) and the color and style of "Iron Man".

[Could I order one of those cod-pieces somewhere? 8-] Navigaiter

They come stock with the pressure liner. (Both the hard shell one, and the "Modesty cover")

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox